Freescale Semiconductor /MK60DZ10 /ENET /RCR

Internal loopback

0 (0): Loopback disabled.

1 (1): Transmitted frames are looped back internal to the device and transmit MII output signals are not asserted. DRT must be cleared. .

Disable receive on transmit

0 (0): Receive path operates independently of transmit (use for full duplex or to monitor transmit activity in half duplex mode).

1 (1): Disable reception of frames while transmitting (normally used for half duplex mode).

Media independent interface mode

1 (1): MII or RMII mode, as indicated by the RMII_MODE bit

Promiscuous mode. All frames are accepted regardless of address matching.

0 (0): Disabled

1 (1): Enabled

Broadcast frame reject

Flow control enable

RMII mode enable

0 (0): MAC configured for MII mode.

1 (1): MAC configured for RMII operation.

no description available

0 (0): 100 Mbps operation

1 (1): 10 Mbps operation

Enable frame padding remove on receive

0 (0): No padding is removed on receive by the MAC.

1 (1): Padding is removed from received frames.

Terminate/forward pause frames.

0 (0): Pause frames are terminated and discarded in the MAC.

1 (1): Pause frames are forwarded to the user application.

Terminate/forward received CRC

0 (0): The CRC field of received frames is transmitted to the user application.

1 (1): The CRC field is stripped from the frame.

MAC control frame enable

0 (0): MAC control frames with any opcode other than 0x0001 are accepted and forwarded to the client interface.

1 (1): MAC control frames with any opcode other than 0x0001 (pause frame) are silently discarded.

Maximum frame length

Payload length check disable

0 (0): The payload length check is disabled

1 (1): The core checks the frame’s payload length with the frame length/type field. Errors are indicated in the EIR[PLC] bit.

Graceful receive stopped